Table saw Fence BEM-Meta Micro adjuster,Free shipping

 If you've grown tired of repeatedly tapping the Biesemeyer fence to align it just right and are looking for a better solution, It is your best choice!

A small investment, a significant return! Easily elevate your cutting precision to remarkable levels. How can you grasp the benefits of adding micro-adjustments? Put simply: with its help, your regular fence instantly gains the impressive ±0.001-inch precise adjustment ability that Incra fences are known for.

- Adjustments as precise as 0.001 inches – a truly Micro adjuster.

- It's plug-and-play compatible with nearly all Biesemeyer fences.

It's a simple and reliable mechanical micro-adjuster based on the BEM chassis design. It's designed to be used with Biesemeyer fence guide rails and offers straightforward operation. No more need for tapping adjustments. It significantly improves the accuracy of fence positioning and can be used as a repeater for precise positioning. It supports bidirectional adjustments, allowing you to achieve perfect alignment with ease. Say goodbye to the frustration of constant adjustments and welcome precision and convenience into your woodworking experience!

Having a micro-adjuster for your table saw fence is highly practical. It not only enhances positioning accuracy but also quickly boosts your woodworking capabilities for detailed cuts. 

How to connect your fence:

As shown in the diagram below, On the right edge of your fence's base, drill two screw holes (drill bit and tap not included! Screw specifications supported: English 1/8, 9/64, 5/32, 11/64, or Metric M3/M4. The product does not include connecting screws!),  connect your fence with two screws.

How to use

After connecting the fence, move it close to the target value, lock the adjuster, and rotate the knob to position the fence to the left or right precisely.

Reading the values from the mechanical differential: To read the values based on the rotation direction, be aware that one increment equals 0.02 millimetres. Determine how many increments you've rotated and calculate the distance using multiplication. However, it's a bit complex to read in practice due to the lack of a zeroing function.

We recommend not getting too caught up in reading the values on the meta micro adjuster. Instead:

1. Carefully observe the pointer's slight movements and adjust it as closely as possible to the target value.
2. If you want faster and more precise adjustments, we recommend purchasing and using the BEM-Data Micro Adjuster

In combination with our Quick-New readout for the best results. This allows you to read the movement amount through the readout directly.

It is compatible with the BEM-Meta fence (no need for drilling; M4 mounting holes are already provided).

Please confirm that it can be used on your fence.
Supports use on almost all Biesemeyer fences and Smitool BEM fences.
The key factor is whether your fence's height and guide rail dimensions meet the requirements:

The distance from the surface of your fence's base to the surface of the guide rail should be in the range of 6-18.3 millimetres, and the width of the guide rail should be in the range of 60-85 millimetres.

As the following diagram, please measure the relevant data to determine if it can be used.

Please note that in cases where the guide rail width is relatively small, you can loosen the two locking screws on the large knob and extend the usable length by rotating the thread to address this issue.

Technical Data:
- Micro Adjustment Range: Left/Right 10 millimetres / 3/8 inch, or One-way 20 millimetres / 3/4 inch
- Micro Adjustment Accuracy: 0.01 millimeters / 0.001 inch
- Materials Used: Stainless Steel and Aluminum Alloy

1. 30-Day Returns.
2. 180-Day Quality Guarantee.
3. Free Laser Marking, Customized Personalized Services.